Totaalleverancier voor grootformaat printoplossingen
glasdecoratie- en whiteboardfolie - polymere PVC-film - dryapply-technologie - dikte 80 micron - zilverkleurige frost uitstraling
DeASLAN EtchedBoard Dryapply EBL 300is a high-quality, self-adhesive glass decoration film that transforms any glass surface into a writable whiteboard. With its subtle sandblasted look, this film combines aesthetics with functionality. The innovative Dryapply technology enables fast, dry and bubble-free application, saving time and effort. Suitable for use with standard whiteboard markers, with written text easily erased dry without leaving shadows or ghosting. Ideal for offices, meeting rooms and educational institutions where flexibility and style go hand in hand.
Merk |
ASLAN EtchedBoard Dryapply EBL 300 |
Type |
Polymer softened PVC film with special coating |
Film thickness |
80 micron |
Surface |
Silver gray with a matte, sandblasted appearance |
Adhesive |
Semi permanent pressure-sensitive transparent polyacrylate adhesive with Dryapply air channels |
Liner |
Double-sided PE-coated paper 130 g/m2 with dry-apply structure |
Application |
Apply dry only |
Important ! |
Do not write on the film for the first 72 hours after placement ! |
The film is designed for application to smooth, transparent surfaces such as glass and acrylic. Make sure the surface is clean, dry and free of dust and grease for optimal adhesion.
Yes, the ASLAN EBL 300 is suitable for both indoor and outdoor applications and has a durability of up to five years when installed vertically in temperate climates.
Clean the surface with a soft, dry microfiber cloth to remove marker residue. Avoid using harsh cleaning agents to maintain the matte finish.
Although the film is resistant to various writing instruments, the use of permanent markers is not recommended, as they are difficult to remove and may leave marks. If accidentally written with a permanent marker, the marks can be removed with alcohol-based cleaners.
The ASLAN EBL 300 is specifically designed with a silver-gray, sandblasted look. For other colors or effects, ASLAN offers alternative products in their range of glass decoration films.
No, the ASLAN EBL 300 is not designed for printing. For printable glass decoration films, ASLAN offers other suitable products.
They should not be applied with water because water accumulates in the air channels. With wet application, the final adhesive strength is reached much later, which can lead to the adhesive turning white.
Thanks to a special adhesive, the films have a reduced initial adhesion. This allows them to be easily corrected during application. This reduces the risk of film damage (white lines).
Its structure is very fine and after some time - depending on humidity and temperature - it is reduced to a minimum. After application, it is visible only at close range.
For window applications, it is recommended to keep a distance of about 2 mm between the film and the edges of the window frame. In this way, accumulation of water, which can lead to a milky white effect and reduced adhesion, is avoided.
Depending on the type of ink, the material may soften, making application difficult. In this case, we recommend using an application tape to ensure easy and safe application, even with full coverage.
