Intercoat P6570 polymeer vinyl 80mic etched glass zilver

Intercoat 1693 Etched Glass Film is ideal for a variety of applications on glass surfaces. It is often used for window decoration, increasing privacy in offices, stores and homes, and for decorating glass doors and partitions. The film offers a subtle etched glass effect that adds both style and functionality to any room. Its high quality and durability make it a popular choice for interior designers and homeowners looking for an elegant and practical solution.

For best results, begin by thoroughly cleaning the glass surface to remove dust, grease and dirt. Use a lint-free cloth and an appropriate cleaning agent. The film can be applied either dry or wet, but the wet method is recommended to minimize air bubbles and facilitate positioning. Spray a mixture of water and a few drops of dish soap on the glass and the adhesive side of the film. Position the foil on the glass and use a squeegee to remove excess water and air bubbles, starting from the center to the edges. Allow the film to dry according to the manufacturer's instructions.

Yes, Intercoat 1693 film is excellent for cutting with a cutting plotter, allowing you to create personalized designs, patterns or text. This makes it ideal for branding, logos or decorative elements on glass surfaces. Although the film is designed primarily for decorative purposes and not specifically for printing, certain printing techniques such as screen printing or UV printing can be used in some cases. It is advisable to conduct tests in advance or contact Dimix for advice on the best printing methods for this film.

The life of the Intercoat 1693 film when used outdoors is up to 5 years, depending on factors such as UV exposure, weather conditions and correct installation. To maximize durability, it is important to apply the film according to the manufacturer's recommendations and perform regular maintenance. With intense exposure to sunlight or extreme weather conditions, service life may vary. Refer to the specifications or contact Dimix for more information on expected performance in your specific situation.

Although the Intercoat 1693 film has a permanent adhesive for long-term adhesion, it can be removed with proper techniques. Gently heat the film with a heat source such as a hair dryer to soften the adhesive. Starting at one corner, slowly and evenly pull the film off the glass. Any adhesive residue can be removed with an appropriate adhesive remover or mild detergent. It is important to proceed carefully so as not to damage the glass surface.

Available documentation does not specifically mention a fire safety certificate for the Intercoat 1693 film. It is important to comply with local regulations and requirements regarding fire safety, especially when used in public areas. For more information on certifications and safety standards, contact Dimix or consult the manufacturer.

To maintain the quality of the Intercoat 1693 film, store it in its original packaging in a dry and cool place. The ideal storage temperature is between 20°C and 25°C, with a relative humidity of 50% to 60%. Avoid exposure to direct sunlight and extreme temperatures to avoid undesirable effects such as distortion or loss of adhesive properties. Under these conditions, the film will remain in optimum condition until you start using it.

Intercoat 1693 Etched Glass Film is available from Dimix, your trusted supplier of high quality sign and print materials. Dimix offers an extensive range of products and is known for its excellent service and expert advice. By choosing Dimix, you are assured of original Intercoat products and professional support for your projects. Visit Dimix's website or contact their team for more information and to place your order.