ASLAN UltraTack DFP07G – 100 µm High‑Tack Gloss Polymer Vinyl (Grey Adhesive)

ASLAN UltraTack DFP07G is a gloss, polymeric PVC digital printing vinyl with an ultra-high tack grey adhesive. Engineered for “hard-to-stick” or low energy surfaces, it delivers permanent, high-coverage adhesion even on textured or coloured substrates while offering 7-year outdoor durability.

Key Features

Ultra-high tack grey acrylic adhesive, optimized for coloured and non‑polar surfaces
Gloss polymeric PVC face film, approx. 75 µm thickness
PE-coated double-sided silicone liner for excellent flatness and moisture stability
Compatibility: solvent, eco‑solvent, latex, UV-curable, screen inks
Outdoor durability up to 7 years (vertical exposure, temperate climate)
Service temperature: –30 °C to +80 °C; minimum application temperature 5 °C
Fire safety / compliance: DIN 4102 / B1; Euroclass DIN EN 13501‑1 (B-s1, d0)bstrates while offering 7-year outdoor durability.

Prijsoverzicht

Long Description

A. Key Benefits & Value to Customers

In signage and visual communication, one of the biggest challenges is achieving reliable adhesion on low surface energy (LSE) materials, textured substrates, or coloured surfaces. Standard vinyl films often fail to stick properly, peel at edges, or develop lifting over time. ASLAN UltraTack DFP07G is engineered to solve precisely that: its ultra-high tack, grey‑pigmented adhesive ensures strong grip even on apolar plastics, rough substrates, or dark/coloured backgrounds, providing excellent coverage and eliminating shadowing or show-through.

For service providers and installers, this means fewer call‑backs, better longevity, and confidence in applying graphics to surfaces that would normally be rejected. From industrial signage to curved surfaces, the product allows greater flexibility in project choice and scope.

B. Detailed Product Capabilities & Construction

Film / Face Material

The face layer is a polymeric PVC film, softened and calendered, with a glossy finish. Typical thickness is ~ 75 µm (3 mil)

Adhesive System

The adhesive is a high-strength, pressure-sensitive grey pigmented polyacrylate designed for extra strong adhesion. It is optimized for cold substrates, delivering initial tack even from 5 °C onward. Over time (after full cure) reach values near ~22 N/25 mm (after 1 week). The grey pigmentation helps mask coloured or dark substrates, improving visual appearance and coverage on high-contrast surfaces.

Release Liner / Backing

A double-sided PE-coated silicone paper liner (approx. 140 g/m²) ensures moisture stability, flatness, and consistent printability without wrinkling or liner curl.

Printability

UltraTack DFP07G supports a wide range of inks: solvent, eco‑solvent, latex, UV-curable, and also screen printing (with proper drying). Be cautious in under-cured inks which may impair adhesion.

Dimensional Stability & Durability

When applied to aluminium and stored at 70 °C, dimension change is minimal (~ –0.45 %) over 48 hours. Outdoor durability under vertical exposure is up to 7 years (in Central European climates). Service temperature range is –30 °C to +80 °C

Safety & Certifications

Flame retardancy per DIN 4102 / B1
Euroclass rating: B‑s1, d0 (DIN EN 13501‑1)
Compliant with toy safety standard DIN EN 71‑3 (i.e. low levels of heavy metal migration)

C. Typical Applications & Industries

Because of its exceptional adhesive power and broad ink compatibility, DFP07G is used in many signage and visual-graphics applications:

Indoor and outdoor signage on low-energy plastics (e.g. polypropylene housings, trash bins)
Wall graphics on textured surfaces or rough plaster
Vehicle graphics or fleet branding, particularly where wrap vinyl may not adhere
Industrial labelling where surfaces are metal, coated aluminum, or treated plastics
Doming labels and embedding in resin / domed surfaces (esp. with strong adhesive)
Long-term architectural graphics, retail displays, POP installations

In many of these use cases, the installer may previously have bypassed such surfaces due to adhesion risk; DFP07G opens new possibilities.

D. Unique Selling Points (USPs)

Grey pigmented adhesive for superior coverage and masking on coloured substrates
Ultra-high tack adhesion that competes even on “impossible to stick” surfaces
Wide ink compatibility, from solvent to UV and screen
Exceptional durability (7 years) in exterior conditions
Certified fire safety and toy safety compliance giving added peace-of-mind
Thermal and dimensional stability even under temperature extremes
Reliable liner construction for better print flatness and fewer feed issues

E. Maintenance, Ease of Use, Integration Features

Application Conditions & Advice

Allow your printed media and substrate to acclimatize to ambient conditions for at least 24 hours before installation.
When applying, cleaning and degreasing the surface is critical for strong bond (use recommended cleaners).
The film can be applied dry or wet. In wet application, some temporary “whitening” of adhesive may occur but will dissipate over a few days.
Use of transfer liquid ASLAN TL10 is suggested for wet installs to assist sliding.
For lettering, mounting film ASLAN TMO / application tapes are recommended to minimize handling and stretching.
Always conduct a test patch when working on surfaces with unknown coatings or treatments (e.g. powder-coated metals, sealed woods) — no guarantee on non-stick coatings.

Storage & Shelf Life

Shelf life before installation: up to 2 years from production date, when stored in controlled conditions (15‑25 °C, 50–60 % RH)
Avoid pressure points — store rolls either standing upright or on hanging racks to prevent deformation.
Use within rated service temperature window to ensure longevity

Integration

This vinyl can be cut, trimmed, laminated (for extra protection), and installed using standard sign shop tools and techniques. Laminates such as ASLAN PremiumProtect SL 17 or SL 18 are recommended to extend life and protect against wear, UV, and abrasion.

Frequently Asked Questions

What makes UltraTack DFP07G more suitable than standard vinyl films for difficult substrates?

UltraTack DFP07G is tailored with a grey-pigmented ultra-high tack adhesive that dramatically increases bonding strength on surfaces where standard adhesives struggle—such as textured, absorbent, low-energy, or coloured substrates. Its adhesive is calibrated for strong initial grab (even at low application temperatures) and long-term durability, thus enabling applications on surfaces normally deemed “non-stick” or challenging. In contrast, a standard film might lift, peel, or fail to bond altogether on such surfaces.

Can I use DFP07G with all types of digital inks (solvent, eco-solvent, latex, UV)?

Yes — the film is compatible with solvent, eco-solvent, latex, UV-curable, and even screen printing inks, assuming proper ink-curing and drying. Insufficient drying may interfere with the adhesive, so it’s vital to allow full curing before lamination or application.

What is the minimum temperature at which I can apply this film?

You can typically apply from +5 °C and above. Below that, the adhesive’s initial tack may weaken, compromising immediate adhesion. For cold environments, consider acclimatizing materials or delaying application until ambient temperature allows.

Can I install the film wet (with slip)?

Yes — it can be applied wet. However, you may see a temporary “whitening” or haze in the adhesive layer, which usually fades over time (a few days) depending on weather conditions. Use of ASLAN TL10 transfer liquid is recommended to assist in sliding and achieving final placement.

How long does the adhesion fully develop?

While the film has good initial grab, full adhesive strength develops over time — approximately 1 week, reaching ~ 22 N/25 mm under ideal conditions. During that period, avoid excessive stress, especially near edges.

What is the expected outdoor durability?

When installed vertically in a temperate climate, the film can last up to 7 years without significant degradation. In more extreme climates or horizontal exposure, effective lifespan may vary. For additional protection, pairing with a UV-resistant laminate is recommended.

Are there any temperature or environmental limits during service?

Yes — the service temperature range is between –30 °C and +80 °C. Exposing beyond those limits (e.g. excessive heat or freezing) may degrade adhesive performance or cause delamination over time.

Can I remove the film later?

This is designed as a permanent, high-tack vinyl. While removal is possible, it will likely require heat, mechanical effort, and may leave adhesive residue—especially on porous or textured substrates. For applications needing removability, consider alternative media.

What surface preparation is recommended?

The substrate should be cleaned thoroughly — free from dust, oils, grease, and contaminants. Use a high-quality degreaser or a manufacturer-recommended cleaner before application. For surfaces with unknown coatings or treatments, conduct a small test patch to verify adhesion.

How should I store the rolls before use?

Store the film in a stable environment: 15–25 °C, relative humidity ~50–60%. Rolls should be kept upright or on hanging racks to avoid pressure marks or deformation. Shelf life is roughly 2 years from production—after which performance might slightly degrade.

Documents

Technical Datasheet

Download Now

Data Table

Face Film	Polymeric softened PVC, gloss finish
Nominal Thickness	≈ 75 µm (3 mil)
Adhesive	Grey pigmented pressure-sensitive polyacrylate, ultra-high tack
Adhesive Weight	~ 35 g/m²
Release Liner	Silicone paper, double-sided PE-coated, ~ 140 g/m²
Initial Adhesive Strength	~ 12.5 N / 25 mm
Adhesive Strength after 1 Week	~ 22 N / 25 mm
Dimensional Stability	≤ –0.45 % after 48h at 70 °C (on aluminium)
Print Compatibility	Solvent, Eco-solvent, Latex, UV-curable, Screen printing
Application Temperature	From +5 °C upwards
Service Temperature	–30 °C to +80 °C
Outdoor Durability	Up to 7 years (vertical exposure, temperate climate)
Fire Certification	DIN 4102 / B1; Euroclass DIN EN 13501‑1 (B‑s1, d0)
Toy Safety Standard	DIN EN 71‑3
Storage Life	Up to 2 years (if stored at 15‑25 °C, RH 50–60 %)
Colour / Finish	White gloss film, grey adhesive

Categorywidget Aslan Ultratack dfp07g

Materiaal	PVC
Oppervlakte	Wit, Glans
Dikte	75 Micron
Lijmtype	Permanent, Grijs
Speciale kenmerken	Voor moeilijke ondergronden

P6195 - ASLAN UltraTack DFP07G polymeer vinyl 100mic wit glans high tack grijs